300-COM Integrated Designs IDS Controller

The Teledyne / Integrated Designs IDS300 Series Integrated Dispense System m is designed to dispense chemicals in very accurate and repeatable amounts. The dispense unit is compatible with a wide variety of chemicals. The Integrated Dispense Unit is controlled by sophisticated electronics, which is in turn driven by detailed software. The system is user friendly and will give the operator complete control of dispensing needs. The unit can be totally integrated to all commercially available process equipment.

Each Dispense Mother board is installed in a stainless steel enclosure capable of housing up to four (4) dispense unit controller boards and one serial communications board. It operates from 100-130 VAC 50/60 Hz. without the need for jumpers (higher voltage model is available). Power supply components have UL & CSA listings. The enclosure has direct ventilation with its installed fan. See the Cabinet Drawing in the Appendix B for configuration examples. With the optional RS232/RS485 serial communications board, the IDS controller can be placed into remote operation. While in the remote mode, controller keyboard entries can be disabled. All programmable features must then be accessed through the communications link. This is covered in detail in the IDS300 Family Controller Communications Protocol technical reference manual. An additional feature on this board is a relay that follows the operation of the audible alarm for activating remote audible or visual alarm indicators.

The Integrated Dispense System has been designed to integrate chemical source switching, liquid level detection, and chemical dispensing into one unit. Additionally the unit has been designed with flexibility of two reservoir sizes so it will adapt to a wide variety of chemical dispense applications. Depending on the chemicals used and the process demands, the unit will operate with or without filtration in the chemical reservoir.