CPX2208 Motorola 8-Slot CompactPCI Chassis, w/ CD and Floppy Drives

CPX2000 Series systems consist of the: CPX2108, CPX2208, CPX2208T, CPX2208TDC, CPX2208DC, CPX2408AC, CPX2408DC, CPX2408TAC, and CPX2408TDC. The CPX2108 chassis is 19 inch rack, wall or benchtop mounted. The CPX2208 and CPX2408 chassis are 19 inch or 23 inch rack, wall or benchtop mounted. The 6U backplane has 8 vertical slots which can accommodate a CPU module up to four slots (16HP) wide; and seven I/O slots, (4HP) wide. You can access these eight slots through the front-panel. The CPX2108 chassis does not support IEEE 1101.11 rear transition modules. The CPX2208 and CPX2408 do support rear transition modules. Three peripheral bays (5.25 inch x 1.63 inch) on the CPX2208 give you front access to floppy, CD-ROM and/or hard disk drives. The CPX2408 gives you five peripheral bays with up to three hard disk drives.

CPX2108 can provide integrated SCSI peripherals (i.e. hard disk drive, CD-ROM or an 80MB Flash Drive on board the CPV5000 Single-Board Computer). CPX2208T and CPX2408T provide an integrated H.110 bus between the J4 connectors of the seven peripheral (non-system) slots. The H.110 bus gives you the medium for communications between fax, text-to-speech, speech recognition and other telecommunications interfaces. This system uses a back plane and system architecture that supports high density, hot swap and eurocard packaging.

The CPX 2000 Series chassis are "hot swap enabled". This means that the chassis can accommodate hot swap modules that conform to the PCI Industrial Computer Manufacturers Group (PICMG) Hot Swap Specification.