This unit ships in the original, sealed manufacturer's packaging.
Configuration:
• PCI I/O Signaling Voltage: 5V
Show More Description
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Features:
- PCI Express Form Factor
- (1) PMC Slot
- 33/66 MHz, 32-bit PCI Interface
The Tews Technologies TPCE260 Series PCI Express PMC Carriers are standard height PCI Express revision 1.1 compatible modules that provide one slot for a single-width PMC module used to build modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control.
The TPCE260 is a versatile solution to upgrade well known PMC I/O solutions to the PCI Express signalling standard.
The bridging between the PCI Express x1 link to the host board and the PCI bus signals to the PMC slot is handled by the transparent PCIe-to-PCI Bridge PI7C9X111SL from Pericom.
The PCI bus side of the bridge allows 32-bit PCI accesses with either 33 MHz or 66 MHz. Both 3.3V (TPCE260-x1R) and 5V (TPCE260-x0R) PCI I/O signalling voltages are supported.
The TPCE260 supports PMC front panel I/O and also PMC P14 rear I/O through a VME P2 style connector (IEC 60603-2, Type C). The I/O mapping of P14 complies with VITA-35 ("PMC P4 to VME-P2, Rows A-C mapping"). The PCIe edge card connector provides +12V and +3.3V. All TPCE260-xx variants do use the +3.3V solely to power the PCIe-to-PCI Bridge.
The TPCE260-1xR uses the +12V of the PCIe edge card connector to generate all four power supply voltages for the PMC slot (+3.3V, +5V, +12V and -12V). According to the PCIe specification, a PCIe x1 card is limited to 6W on the +12V which allows to operate most of the available 32-bit 33/66 MHz PMC modules on the TPCE260-1xR.
For increased power requirements of a PMC module, the TPCE260-2xR offer a PCIe Graphics Power Connector to supply the +12V for generating all the power supply voltages for the PMC slot providing a power of up to 25W.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Tews Technologies. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
I found that the staff is very knowledgeable. I would recommend them to anyone looking for this type of equipment!
Have dealt with Artisan for over a decade and have always found them to be knowledgeable, professional and have a great inventory to choose from! Great company!
The customer service representative was great. She couldn’t answer my question but connected me to an engineer who made sure I was ordering the right part. Shipping was fast too.
Quick process from getting a quote to getting the items we ordered.