Teledyne / LeCroy / Catalyst SBAE-20 USB Analyzer/Exerciser
- High-Speed, Full-Speed, and Low-Speed Analyzer and Exerciser as Host
- Proprietary Built-In Repeater Interface Prevents Signal Distortion
- Compliance Testing for Inrush, Suspend, Configured, and Un-Configured Current
- Up to 480 Mbit/Sec Real-Time Continuous Performance Analyzer
- Interactive "Linked" Exerciser Analyzer Operation in High, Full, and Low Speeds
- Adjustable Data Out for Timing Characterization for Full and Low Speeds
A proprietary repeater circuitry is designed in as an interface to the analyzer to prevent signal distortion when the analyzer is introduced between the host and the device to analyze high speed protocols. The auxiliary connectors for device and host on the SBAE allow for testing USB Hub input and output. These two auxiliary ports can also be used as a second channel (full- and low-speed only) for the analyzer.
Eight user defined packets, including all USB protocol fields, are available to define patterns for capture and triggering. A flexible 32-state sequencer allows users to define a sequence of actions to be performed by the hardware depending on the events and packets on the USB bus. The Analysis and Exercising actions may be defined in the Sequencer to be conditional based on events on the bus.
The SBAE-20 has six counters and four timers to measure items as throughput of bus, efficiency of a device, bus usage by a device, data rate, etc. SBAE-20 detects up to 12 protocol errors simultaneously with sampling. The SBAE-20 samples inrush current for the initial 10 milliseconds with 0.2 µs resolution. This measurement is then displayed on the screen with a pass/fail report. SBAE-20 measures these currents with resolution of 2.7 mA for operating and un-configured current and 2.7 uA for suspend current.
Teledyne / LeCroy / Catalyst SBAE-20 USB Analyzer/Exerciser Manuals, Datasheets, Drivers, Links
Teledyne / LeCroy / Catalyst SBAE-20 USB Analyzer/Exerciser Specs
| Analyzer | |
| Bus Type | USB1.0 and USB 2.0 |
| Bus Width | 1 |
| Maximum Transaction Rate | 480 Mbit/sec |
| External Outputs | 8 |
| External Inputs | 2 |
| Maximum Memory Depth per Channel | 128 MB |
| Time-Tag | 40-bit time tag for every sixteen samples |
| Word Recognizer | 8 |
| Trigger Event | Any of the 8 defined packets, Boolean expression of them, 4 Bus States, Packet Error and 2 external inputs and a manual trigger |
| Event Counter Width | 24 |
| Event Interval Measurement Width and Resolution | 32 / 60MHz |
| 32 Level Sequencer | Supported at each level by Store, Set Trigger, Set Tag, Discard, If, Else IF and Start Exerciser |
| Counter Use | Count accumulative, count more than, count less than |
| Time Tag | |
| Counter | 40 bits |
| Recording Duration | Up to 5 hours at 16.6ns |
| Reported Display | Absolute time from start, relative to Trigger point, relative to each packet sampled |
| Performance Analysis | |
| Event Counter | 6 x 24 bits counter |
| Event Interval | 8 x 32 bits timer |
| Count Mode | Reset and accumulative |
| Measurement Reports | Normalized to largest per interval or reset to zero |
| Output Report | Bar graph, Pie chart and histogram. |
| Display Mode | Color 2D and 3D |
| Host CPU Interface | Real time FIFOs |
| Utilities | |
| Search | On Packet, Transaction and Event, forward and backward |
| Filter | Filter in and out the packets, transactions and events in the viewer and save the result |
| Report | Report on sampled data on: • Protocol errors • Asynchronous transactions • Synchronous transactions • Setup transactions • Split transactions • Preamble transactions • Packet count • Bus events and timing |
| Exerciser | |
| Bus Width | 1 |
| Max Transaction Rate | 480 Mbit/s |
| Bus Speed | High, full, and low |
| Link | To the analyzer, start in a defined state. |
| Mode | Host |
| Data Block Generation | |
| Data Block Generation with user defined pattern, walking bit, random pattern | |
| 1, 2, 4, 8, 16 and 32 bytes wide | |
| Up to 1024-byte depth | |
| Easily generated in GUI interface | |
| Current Measurement | |
| Inrush | 200 ns sampling resolution, 20mA resolution 5A peak or 40mA resolution and 10 Amps peak |
| Operating/Un-Configured | 2.7mA resolution, 700mA maximum |
| Suspend | 2.7uA resolution, 700uA maximum |
| General | |
| Manufacturers | Teledyne / LeCroy / Catalyst |
| Model | SBAE-20 |
| Condition | Used and in Excellent Condition |
| Product Family | SBAE-20, SBAE20 |
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 74765-1 - Teledyne / LeCroy / Catalyst SBAE-20 USB Analyzer/Exerciser
Expedited, Freight, and International shipping available.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our 90-Day Repair/Replace/Refund Warranty.
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
Great company!
AMAZING PEOPLE. AMAZING WORK.
We have some test equipment in our lab from the 1990's that stopped working about 2 years ago. It sat in the corner collecting dust, but we took on a project last month that required more machines. After talking to Artisan, we found out we could get parts to fix our machine for much less than buying a new one!
The customer service representative was great. She couldn’t answer my question but connected me to an engineer who made sure I was ordering the right part. Shipping was fast too.