Danaher Motion / Kollmorgen PSR4/5A-250 Power Supply with Regeneration
Configuration:
• Power Supply Generation Indicator: U.L. 508 Listed Configuration, Used with BDS4A Series Servo Motor Amplifiers
• AC Line Voltage: 230 VAC; 3 Phase
• AC Line Current, RMS: 50
• Mechanical Options: Standard, No Options
• Electrical Options: Standard. No Options. 12 and 20 Amp Models Contain 40 Watt Internal Regeneration Resistor. 50 and 75 Amp Models Require Regeneration Resistor Kit EX-2X (May be ordered separately from the manufacturer)
- Modular Construction Maximizing Serviceability
- Two-part Plug Connectors Interfacing Between the BDS4, PSR4/5 and Other Equipment
- Contains a Soft Start Function and a Dynamic Bus Discharge Function
- Diagnostic LED Indicators
1. The Unregulated Logic Bus, supplied by the Control AC line input voltage (normally single-phase 115 VAC.
2. The 310/140 Main DC Bus is supplied by the main AC line input voltage (normally three-phase 230 VAC or single-phase 115VAC).
3. The Soft-Start Feature (standard) resistor limits the inrush current (to charge-up the Main Bus Capacitors).
4. The Shunt Regulator (regeneration) section includes circuitry which monitors the main bus. During deceleration profiles, the motor basically operates as a DC generator and pumps energy back into the main bus causing the bus to rise. The Shunt Regulator limits the voltage rise during the deceleration periods.
12 and 20 AMP Models: The shunt regulator (regeneration) resistor load is fuse protected. If the shunt regulator is held on for too long, the shunt regulator power transistor fails, or the shunt regulator load resistor becomes shorted, the fuse will blow and cause the Fault Contact on the PSR4 to open and the BLOWN REGEN FUSE LED to become illuminated.
The shunt regulator also includes a duty cycle limit circuit to protect against excessive load resistor heating. If the average duty cycle limit is exceeded, the regeneration circuitry will become disabled, the Fault Contact will open, and the OVERLOAD LED will become illuminated. To reset this fault, remove and reapply all input line power; bus capacitors must completely discharge.
50 and 75 AMP Models: The shunt regulator (regeneration) resistor is protected by a thermal overload relay. If the resistor rating is exceeded or if the shunt regulator transistor fails, the thermal overload output contacts will open indicating an IMMEDIATE need to remove the main power.
Danaher Motion / Kollmorgen PSR4/5A-250 Power Supply with Regeneration Manuals, Datasheets, Drivers, Links
Danaher Motion / Kollmorgen PSR4/5A-250 Power Supply with Regeneration Specs
| General | |
| Manufacturers | Danaher Motion / Kollmorgen |
| Model | PSR4/5A-250 |
| Condition | Used and in Excellent Condition |
| Product Family | PSR4 |
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 80975-2 - Danaher Motion / Kollmorgen PSR4/5A-250 Power Supply with Regeneration
Expedited, Freight, and International shipping available.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our 90-Day Repair/Replace/Refund Warranty.
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
Great company staff is extremely knowledgeable!!
Staff knows their stuff! Very knowledgeable and helpful. Very satisfied!
We found Artisan when our PXI Chassis broke, which shut down our production line. We were up and running in less than a day because they shipped overnight and talked our tech guys through the installation over the phone. ATG saved the day big time!
I just want to thank you and the staff at Artisan for your prompt dispatch of the 34401A main board. I got it a couple of hrs. ago, removed the old board, installed the new and the result is as shown in the attachment. It not only works, but is calibrated to the last digit! I am very pleased and will definitely recommend your firm to my friends and colleagues. I really appreciate doing business with a firm that values service.