Abaco Systems / Radstone G4DSP-7410-244B4 Signal Board DSP Processor
Configuration:
• Processor: Quad Motorola MPC-7410 (G4)
• Processor Speed: 500 MHz
• Process Bus Speed: 100 MHz
• Memory/Node: 256 MB SDRAM
• Cache/Node: 2 MB L2
• Flash/Node: 16 MB
• Ruggedization: Build Level 2, Air-Cooled, Conformal Coated (-20 °C to 65 °C)
• PO Connector: Type B Fitted
• Boot ROM: BIT & VxWorks 5.5
Part Numbers: 10490989
- Four MPC7410 (G4 with AltiVec) Compute Nodes at 400 - 550 MHz
- 14+ GFLOPS Signal Processing Performance
- Four Xilinx 7410XC95144XV PLDs Interrupt Controllers
- 528 Mbytes/Second Peak Node-To-Node Performance
- 256 Mbytes of SDRAM per G4 Compute Node
- 16 Mbytes of FLASH per G4 Compute Node
The G4-7410 version of the G4DSP is the latest variant of the G4DSP design. It is application compatible with previous versions of the board but care must be taken with selection of paddle cards as there are a number of signal changes that make the new version unsuitable for use with the paddle cards used with the previous version.
Each of the four MPC-7410 (G4) compute nodes comprises 256 Mbytes of SDRAM, 16 Mbytes of FLASH, 2 Mbytes of L2 Cache, a Xilinx 7410XC95144XV interrupt controller PLD, and an IBM CPC710-133 64-bit/66 MHz PCI bridge. Providing each G4 compute node with its own dedicated PCI bridge allows each nodes PCI bandwidth to be optimized. Additionally, each G4 compute node uses its processor bus independently. Again, this maximizes processor I/O bandwidth, lowers latencies, and optimizes overall processor performance.
On-board inter-node communications are achieved through a loosely coupled, multiple 64-bit/66 MHz PCI bus architecture. This architecture accommodates a common shared-memory area for low-level message passing (supporting VxMP and VSPWorks), and a compute node shared-memory area for fast node-to-node communications, where each compute node has a unique shared-memory area with each of its neighbors. This innovative architecture is made possible by the use of non-transparent PCI-to-PCI bridges and PCI memory mapping, resulting in very fast and efficient multi-processing that does not inhibit PCI bus performance.
The G4DSP provides two independent 64-bit/66 MHz PMC sites for data acquisition and multi-board connectivity. These PMC sites accommodate industry-standard PMC modules from Radstone or thirdparties. Additionally, the G4DSP provides a 32-bit/33 MHz P0 PCI Master/Slave interface, and VME64. G4DSP is suitable for use with PMCs that require impedance and length-matched tracking for applications such as Fibre Channel and PanelLink.
As with the hardware architecture, software support is also open-standard to protect software investment and ease development. The G4DSP supports VxWorks and VxMP, ChaMPIon/RT and VSI/Pro (from MPI Software Technology) on top of VxWorks, and Wind River Systems VSPWorks real time operating system. This is backed up by Radstones Built-In-Test (BIT) and driver support for Radstone PowerX SBCs under VxWorks.
The G4DSP is available in Radstones five electrically-compatible build levels. These have two basic mechanical configurations:
• Air (convection)-cooled (build levels 1 to 3) in accordance with ANSI/VITA 1-1994 specification, designed to be used in standard industrial VME chassis
• Conduction-cooled (build levels 4 and 5) in accordance with IEEE Std 1101.2-1992, for use in Radstone or third party ATR style enclosures.
In addition to these COTS configurations, G4DSP may be supplied to meet the mechanical and thermal requirements of specific platforms with the addition of mission specific, to-type mechanics. Radstone uses advanced thermal and mechanical design in the PCB, metal work and assembly process to build-in the required levels of ruggedness. Build level 2 and higher circuit card assemblies include conformal coating. All five styles fully support the power and versatility of the VMEbus, so no matter how large or diversified your project, absolute compatibility is assured at all stages of development.
Abaco Systems / Radstone G4DSP-7410-244B4 Signal Board DSP Processor Manuals, Datasheets, Drivers, Links
Abaco Systems / Radstone G4DSP-7410-244B4 Signal Board DSP Processor Specs
| General | |
| Manufacturers | Abaco Systems / Radstone |
| Model | G4DSP-7410-244B4 |
| Condition | Used and in Excellent Condition |
| Product Family | G4DSP, G4-7410, G4 7410, G47410, G4DSP-7410-141B4, G4DSP 7410 141B4, G4DSP7410141B4 |
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 83621-2 - Abaco Systems / Radstone G4DSP-7410-244B4 Signal Board DSP Processor
Expedited, Freight, and International shipping available.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our 90-Day Repair/Replace/Refund Warranty.
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
I find the employees helpful and knowledgeable about their products.
Contacted Artisan for hard to find that has been out of circulation for nearly a decade. Their rapid response and availability exceeded all other suppliers. They supplied the part overnight to an out of state facility which allowed us to repair our equipment successfully. Well packed electronics. Well stated and professional documentation. I work with a hundred different suppliers any day of the week in my profession. Artisan remains at the very top of the bookmark tab. Thanks so much.
We have some test equipment in our lab from the 1990's that stopped working about 2 years ago. It sat in the corner collecting dust, but we took on a project last month that required more machines. After talking to Artisan, we found out we could get parts to fix our machine for much less than buying a new one!
I just want to thank you and the staff at Artisan for your prompt dispatch of the 34401A main board. I got it a couple of hrs. ago, removed the old board, installed the new and the result is as shown in the attachment. It not only works, but is calibrated to the last digit! I am very pleased and will definitely recommend your firm to my friends and colleagues. I really appreciate doing business with a firm that values service.