Astronics / EADS / Racal 2561 VHF/UHF Receiver
This Astronics / EADS / Racal 2561 VHF/UHF Receiver is used and in excellent condition.
Part Number: RVXI-3550, 2804-1000-3
Part Number: RVXI-3550, 2804-1000-3
Show More Description
Stock # 84089-2
More Information
Astronics / EADS / Racal 2561 VHF/UHF Receiver
Features
- 20-1200 MHz Tuning Range with 10 Hz Tuning Resolution
- High Dynamic Range
- Quadrature Digital IF Output (I&Q)
- (...)
- Sweep or Scan up to 100 Channels per Second
- 17 Standard Bandwidths
Description
The Astronics / EADS / Racal 2561 VHF/UHF Receiver is a high performance computer controlled 20 to 1200MHz single-slot C-sized VXIbus DSP receiver. Systems requiring standard instrumentation can now(...) include receiver technology. All of your VHF/UHF communication as well as Test & Measurement requirements are accomplished utilizing Digital Signal Processing (DSP) design for superior performance, higher reliability and lower cost.In production ATE systems, where known frequencies need to be checked for spurious or harmonic content, the 2561 may be used as a signal level analyzer. The cost savings over a spectrum analyzer are significant.
Applications that require frequency occupancy or remote monitoring can now utilize up to 12 Model 2561’s in a single mainframe. This “system” may be located in the back of a vehicle or unmanned location. A program to control and gather data from the receivers can be built onto an embedded computer. The gathered data can be sent over the radio or land line to a central location.
Applications include cellular radio frequency occupancy monitoring, propagation studies, direction finding and RF interference locating. This DSP receiver offers significant improvement over analog receivers. These improvements include increased stability and precisely controlled filter characteristics which translates into greater reliability and performance.
Scan up to 250 pre-selected channels at a preset scan rate (up to 100 ch/s) and squelch level (ranging from 6 to 30dB). Sweep through up to 125 user-selectable bands setting dwell and bridge times of up to 9 seconds. Sweep step size may be specified and up to 100 frequencies may be skipped.
Harness the power of DSP technology by loading the 2561’s on-board flash with user-specified demodulation schemes, filtering or complex functions. Flash memory may be re-programmed any time over the VXIbus transforming the 2561 into a custom receiver for special applications.The Astronics / EADS / Racal 2561 VHF/UHF Receiver is a high performance computer controlled 20 to 1200MHz single-slot C-sized VXIbus DSP receiver. Systems requiring standard instrumentation can now include receiver technology. All of your VHF/UHF communication as well as Test & Measurement requirements are accomplished utilizing Digital Signal Processing (DSP) design for superior performance, higher reliability and lower cost.
In production ATE systems, where known frequencies need to be checked for spurious or harmonic content, the 2561 may be used as a signal level analyzer. The cost savings over a spectrum analyzer are significant.
Applications that require frequency occupancy or remote monitoring can now utilize up to 12 Model 2561’s in a single mainframe. This “system” may be located in the back of a vehicle or unmanned location. A program to control and gather data from the receivers can be built onto an embedded computer. The gathered data can be sent over the radio or land line to a central location.
Applications include cellular radio frequency occupancy monitoring, propagation studies, direction finding and RF interference locating. This DSP receiver offers significant improvement over analog receivers. These improvements include increased stability and precisely controlled filter characteristics which translates into greater reliability and performance.
Scan up to 250 pre-selected channels at a preset scan rate (up to 100 ch/s) and squelch level (ranging from 6 to 30dB). Sweep through up to 125 user-selectable bands setting dwell and bridge times of up to 9 seconds. Sweep step size may be specified and up to 100 frequencies may be skipped.
Harness the power of DSP technology by loading the 2561’s on-board flash with user-specified demodulation schemes, filtering or complex functions. Flash memory may be re-programmed any time over the VXIbus transforming the 2561 into a custom receiver for special applications.The Astronics / EADS / Racal 2561 VHF/UHF Receiver is a high performance computer controlled 20 to 1200MHz single-slot C-sized VXIbus DSP receiver. Systems requiring standard instrumentation can now include receiver technology. All of your VHF/UHF communication as well as Test & Measurement requirements are accomplished utilizing Digital Signal Processing (DSP) design for superior performance, higher reliability and lower cost.
In production ATE systems, where known frequencies need to be checked for spurious or harmonic content, the 2561 may be used as a signal level analyzer. The cost savings over a spectrum analyzer are significant.
Applications that require frequency occupancy or remote monitoring can now utilize up to 12 Model 2561’s in a single mainframe. This “system” may be located in the back of a vehicle or unmanned location. A program to control and gather data from the receivers can be built onto an embedded computer. The gathered data can be sent over the radio or land line to a central location.
Applications include cellular radio frequency occupancy monitoring, propagation studies, direction finding and RF interference locating. This DSP receiver offers significant improvement over analog receivers. These improvements include increased stability and precisely controlled filter characteristics which translates into greater reliability and performance.
Scan up to 250 pre-selected channels at a preset scan rate (up to 100 ch/s) and squelch level (ranging from 6 to 30dB). Sweep through up to 125 user-selectable bands setting dwell and bridge times of up to 9 seconds. Sweep step size may be specified and up to 100 frequencies may be skipped.
Harness the power of DSP technology by loading the 2561’s on-board flash with user-specified demodulation schemes, filtering or complex functions. Flash memory may be re-programmed any time over the VXIbus transforming the 2561 into a custom receiver for special applications.
Show More Description
Technical Specifications
Manuals, Datasheets, Drivers, Links
View It Live Request
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
InstraView Request Form
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 84089-2 - Astronics / EADS / Racal 2561 VHF/UHF Receiver
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Astronics / EADS / Racal. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Customers Also Viewed
