This Rastergraf / Peritek PMB-P PMC to PCI Adapter Board with On-Board PCI Bridge is used and in excellent condition.
Configuration:
• Connectors: PMC
Part Number: AE1-00742-1100
Show More Description
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Features:
- 32 and 64-Bit PCI Bus Compatibility
- Test Points and Power LEDs
- Optional VME P2 Connector
- On-Board PCI Bridge
- Asynchronous Operations at up to 2.5:1 Clock Speed Differential
The Rastergraf / Peritek PMB-P Series PMC to PCI Adapter Board with On-Board PCI Bridge is a single slot PCI board enables any 32-bit or 64-bit PMC (PCI Mezzanine Card) module to be plugged into a standard PCI slot.
The PMB-P is form and fit compatible with Rastergraf / Peritek's PMA-P passive adapter. Its PLX PCI6154 bridge chip is similar to the Intel 21154 but offers extended capabilities, including asynchronous operations at up to 2.5:1 clock speed differential.
The PMB-P is a Universal PCI board that plugs into any PCI slot; 32 or 64 bit, 33 or 66 MHz, 3.3 or 5 Volt VIO. The board’s PMC (local side) slot supports 33 or 66 MHz independent of the host bus, local 32-bit or 64-bit operation, and local clock slaved to the host PCI Clock. Jumpers allow the user to select the operation mode.
Separate power planes are provided for +3.3V and ground. Bypass capacitors are located at regular intervals across the board and at all PMC and PCI power pins, including +12V, -12V, +5V, +3.3V, and VIO. To aid in debugging, the PMB-P has Test Point pins and LED indicators for BUSMODE1, +12V, -12V, +5V, +3.3V and VIO. It also has a connector for the JTAG port. PMC Index Pin holes are provided for both 3.3V and 5V PMC signaling pins so that the PMB-P can be configured for either bus environment.
An optional VME P2-type connector can be included which “breaks out” the User I/O signals on the PMC Pn4 connector. The traces between the Pn4 and the P2 connector are carefully routed for length-matching and reduced crosstalk effects. The PMB-P provides optional local 3.3V gener- ation because many PCI bus machines do not supply it.
The PCI bridge allows the trace lengths to comply with the PCI specifica- tion (something a passive carrier like the PMA-P cannot do) and which some PCI devices require for proper operation at 66 MHz.
Rastergraf / Peritek also makes an active (bridged) dual-PMC site CompactPCI product, the PMB-CPMC-to-CompactPCI adapter. Also available are pas- sive (bridgeless) single PMC slot PCI (PMA-P) and CompactPCI (PMA-C) boards.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Rastergraf / Peritek. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Highly technical staff! Excellent customer service!
Staff knows their stuff! Very knowledgeable and helpful. Very satisfied!
These people are amazing and absolutely *outstanding* at what they do. The customer service is terrific, every product is shipped to the exact specifications I ordered, and everyone has consistently bent over backwards to help me. They also carry a wide range of products and offer exceptional support. Very highly recommended!!!
I just want to thank you and the staff at Artisan for your prompt dispatch of the 34401A main board. I got it a couple of hrs. ago, removed the old board, installed the new and the result is as shown in the attachment. It not only works, but is calibrated to the last digit! I am very pleased and will definitely recommend your firm to my friends and colleagues. I really appreciate doing business with a firm that values service.