V275-ME11 Kinetic Systems 12-Bit D/A Converter VXI Module

The DynamicSignals / Kinetic Systems V275 Series 12-Bit D/A Converter VXI Modules are single-width, C-size, register-based, VXIbus modules for generating eight output voltages. The standard output is 0 to +10 V with a maximum load of 5 mA. Options of the module are available with output ranges of 0 to +5 V, ±2.5 V, ±5 V, and ±10 V. A 12-bit register is provided for each channel. The data is written in two's complement format, and is right-justified (i.e., the LSB is written to D00). Settling time of the output to within 1/2 LSB is less than 4 μs. The output impedance is less than 100 mΩ. The outputs of the V275 will withstand an indefinite short circuit to ground.

The V275 is calibrated at the factory for zero offset and accurate gain. All outputs are referenced to a common ground (module ground). In critical applications, these signals should be received by differential input circuits.

The V275 supports both static and dynamic configuration. Access to the dual-ported memory is via memory locations pointed to by the Offset Register within the VXIbus Configuration Register set, using A24/16, D16 data transfers. All eight channels are accessed using the same VXIbus address.