SSP 240-20 Gossen Metrawatt SSP KONSTANTER Laboratory Power Supply

The Gossen Metrawatt SSP 120/240/320 Series SSP KONSTANTER Laboratory Power Supplies includes programmable, voltage and current regulated DC power supplies with 120 W, 240 W or 320 W of output power.

They include a µP-controlled operating system and are furnished with an addressable RS 232C serial interface as standard equipment. Up to (30) instruments can thus be controlled from a single PC port.

An IEEE 488 interface can be optionally integrated. Both PC interfaces allow for complete control of all instrument functions, and support the querying of measurement values, set-up parameters and instrument conditions.

Manual adjustment of voltage and current is accomplished with two rotary pulse generators with adjustable resolution.

Two 4-place multifunction displays allow for the accurate read-out of measurement values (V, A, W), as well as menu-driven parameter adjustments for a multitude of additional functions such as setting range limitation, overvoltage protection, delayed overcurrent shut-down or programmable digital signal inputs and outputs.

Up to (243) settings can be stored to memory and can be recalled either individually or sequentially, e.g. for the generation of specific current or voltage sequences. The advanced circuit technology is capable of essentially load-independent response times of less than 1 ms.

The output parameters can thus be superimposed with AC signals with values up into the kHz range with the analog interface which is furnished as standard equipment.

The measuring function is equipped with an extreme value memory, limit monitoring signals and a hold function.