QSX-VSR-110-10S-20-6A Quasonix E-TIMTER Multi-Mode Telemetry Transmitter

The Quasonix E-TIMTER Multi-Mode Telemetry Transmitters are designed to transmit airborne telemetry data from a test article to ground stations. The E-TIMTER is designed to be mounted by four (4) 6-32 screws through the holes in the four corners. The E-TIMTER has two external connectors, an MDM-15 for all baseband interfaces, and an SMA female for the RF output connection. The minimum RF output power is 5 Watts (10 Watts with either Option 09 or Option 10). When the RF load VSWR is < 2:1 at all phase angles from 0 to 360 degrees. The transmitter electrical current drain does not exceed 1.8 amps (2.5 amps with either Option 09 or Option 10). The carrier frequency is selectable in 0.5 MHz steps from 2200.5 MHz to 2389.5 MHz (Sband) or 1435.5 MHz to 1534.5 MHz (L-band). The frequency error is less than ±20 ppm over all combinations of temperature, voltage, and aging (up to five years). The E-TIMTER is designed for efficient heat transfer between internal heat producing sources and the baseplate. It is rated for operation with baseplate temperatures ranging from -40°C to +85 °C, except for units with Option 09 or Option 10, which are specified to operate from -40°C to +70°C.