S22 Danaher Motion Stepper Motor

Danaher Motion / IDC S22 Stepper Motor Overview

Features:

• Bipolar Current Ratings
• High Torque-to-Inertia
• 120°C Rated Class B Winding

The Danaher Motion S22 Stepper Motor may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).

Stepper Motor Price & Specs

Danaher Motion / IDC S22 Stepper Motor Description

Functions

Hybrid stepper motor operates on two phases, features high-torque output, precise positioning, and low-resonance function. Integrates bipolar drive circuits for efficient power consumption. Interfaces via standard NEMA connectors, allowing compatibility with various motor controllers and simple interfacing with PLCs and microcontrollers through pulse and direction control signals. Supports closed-loop systems when paired with encoders. Suitable for automation, CNC machines, and robotics requiring high precision. Operates within specified step angle and holding torque parameters, engineered for durability and low maintenance.

Platforms

Designed for hybrid stepper motor control, this equipment operates within Danaher Motion's IDC SmartStep platform, supporting precise current, anti-resonance, and inductance adjustments via an integrated keypad interface. It connects to stepper motors through dedicated drive terminals, facilitating microstepping control to optimize torque and reduce motor heating. Applications include positioning and motion control in automated machinery where high accuracy and repeatability are essential. The hardware platform integrates with other motion control components and supports field-configurable parameters to match motor electrical characteristics and enhance dynamic performance.

Applications

Stepper motor designed for precise motion control applications. Provides incremental rotational movement in discrete steps, offering accurate positioning without feedback sensors. Utilized in automation systems, CNC machines, robotics, and precision equipment where controlled movement is essential. Features include high torque at low speeds, excellent positioning accuracy, and compatibility with standard stepper drive systems. Typically implemented in open-loop control systems where precise incremental movement is required without the complexity of closed-loop feedback.

Accessories

Requires DC power supply (12-48VDC typical), stepper motor driver/controller with pulse and direction inputs. Motor features 8-wire configuration allowing series, parallel, or unipolar connection. Standard NEMA 23 mounting pattern with 4 threaded holes. Shaft: 0.25" (6.35mm) diameter with flat key. Flying leads or optional MS connector with 8 pins for phase connections. Compatible with microstepping drives supporting 2-phase bipolar stepper motors. May require encoder feedback cable if equipped with optional encoder. Heat sink mounting recommended for continuous operation above 2A/phase.

Interfaces

DB9 female connector for motor power and control signals including step, direction, and enable inputs. Two 8-pin RJ45 connectors for daisy-chaining multiple drives via RS-485 serial communication. 4-pin Phoenix contact terminal block for 24-48 VDC power input. 6-pin Phoenix contact terminal block for motor phase connections (A+, A-, B+, B-) and ground. DIP switch bank for setting motor current, microstepping resolution, and idle current reduction. Two LED indicators for power and fault status.

Specifications

Electric two-phase, 22-frame size hybrid stepper motor designed for precise microstepping motion control applications. Features standard NEMA mounting configuration, high torque-to-inertia ratio, and optimized step angle accuracy. Provides up to 200 steps per revolution with 1.8° step angle and holding torque typically between 0.5-1.8 Nm depending on winding configuration. Constructed with neodymium magnets and engineered lamination stack for maximum efficiency. Operates at common DC bus voltages with phase currents up to 5A. Compatible with various industrial drives, controllers, and positioning systems for automation, robotics, CNC, and precision instrumentation applications.

This section includes content generated with the assistance of artificial intelligence (AI) tools. AI is used to increase efficiency and provide timely information. Please note that the content may not have been reviewed for accuracy or completeness. Use this information at your own discretion, and verify details independently as needed.

Danaher Motion / IDC S22 Stepper Motor Manuals, Datasheets, Drivers, Links

• Industrial Devices S21/S22/S23 Datasheet (pdf)
• View all Danaher Motion products

Danaher Motion / IDC S22 Stepper Motor Specs

Need More Info

We know that questions arise, and that sometimes you need more details or a closer look to make the right decision. That’s why we make it easy for you to reach out directly—so you’re never left wondering.

With our team, you’re just a message away from clarity and confidence. Whether you have a specific question, need a particular image, or want more details, the request form puts you in control. Let us know what you need, and we’ll bring the answers straight to you—no guesswork required!