HARD DISK TEST PRODUCTS - Price and Info
This American Hofmann OS-1 Optical Scanner is used and in excellent condition.
This American Hofmann OS-1 Optical Scanner with cable is used and in excellent condition.
Configuration:
•Cable Length: Approximately 35 in.
Configuration:
•Cable Length: Approximately 35 in.
This American Hofmann OS-1 Optical Scanner is used and in excellent condition.
This Schmitt Industries TMS 2000 Texture Measurement System is used and in excellent condition. This unit includes computer, monitor, TMS software v3.11, and MESA v3.2.c2.
Computer Info
• OS: Windows NT4.0 and SP6
A PS2 mouse and keyboard are required to make this unit complete.
View Photo of the full texture scan
View Photo of the full surface scan with a low filter
View Photo of the full surface scan data
View Photo of the full scan data
Computer Info
• OS: Windows NT4.0 and SP6
A PS2 mouse and keyboard are required to make this unit complete.
View Photo of the full texture scan
View Photo of the full surface scan with a low filter
View Photo of the full surface scan data
View Photo of the full scan data
This American Hoffmann R-11 Round-Spring Measuring Table is used and in excellent condition. This unit includes one DIN-5c and one DIN-8 connectors.
This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope is used and in excellent condition.
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 3DE478-A0
• Installed Option Key: 9D8E-60C9-AEF7-18B1
• Options Enabled by this Key: MC01
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 3DE478-A0
• Installed Option Key: 9D8E-60C9-AEF7-18B1
• Options Enabled by this Key: MC01
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
This HDI Instrumentation IPS-6000 / SRA-FA Hard Disk Surface Reflectance Analyzer and Controller is used and in excellent condition. The unit comes in two parts, the controller-processor unit, and the hard drive platter surface analyzer. All the necessary cables needed to operate this instrument are included. The software needed to run is loaded onto the system hard drive. Upon request, a Ghost Image of the hard disk can be provided by Artisan Technology Group for system software backup and restore.
An Artisan Technology Group technician and Engineer tested this system and successfully ran many types of scans on spare hard disk platters from our lab that were scratched and scribed. The results of theses tests as well as their interaction with the system's software was well documented. This document was created for download by our technicians:
HDI SRA FA Test Results and Function Document Made by ATG Technicians (pdf)
The system is easy to run, and there are program help files to assist. Tests available run from the extensive (slow) to faster quick checks. This instrument was decommissioned from an active production environment.
Processor Controller Unit:
Model: IPS-6000
Part Number: 1000-0051
Input Voltage: 240 V
Operating System: Windows 2000 Professional
Hard Disk Analyzer:
Model: SRA-FA
An Artisan Technology Group technician and Engineer tested this system and successfully ran many types of scans on spare hard disk platters from our lab that were scratched and scribed. The results of theses tests as well as their interaction with the system's software was well documented. This document was created for download by our technicians:
HDI SRA FA Test Results and Function Document Made by ATG Technicians (pdf)
The system is easy to run, and there are program help files to assist. Tests available run from the extensive (slow) to faster quick checks. This instrument was decommissioned from an active production environment.
Processor Controller Unit:
Model: IPS-6000
Part Number: 1000-0051
Input Voltage: 240 V
Operating System: Windows 2000 Professional
Hard Disk Analyzer:
Model: SRA-FA
This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: E37B76-ED
• Installed Option Key: E47E-E3C7-FDE7-F567
• Options enabled by this key: MC01,JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: E37B76-ED
• Installed Option Key: E47E-E3C7-FDE7-F567
• Options enabled by this key: MC01,JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 98158-FC
• Installed Option Key: 4F59-9748-866C-70CA
• Options enabled by this key: MC01,JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)…Currently not working on this unit
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 98158-FC
• Installed Option Key: 4F59-9748-866C-70CA
• Options enabled by this key: MC01,JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)…Currently not working on this unit
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 736507-E6
• Installed Option Key 0: 0813-9073-9A2F-F09D
• Options enabled by key 0: WP01, WP02, WP03
• Installed Option Key 1: 51AB-FB0A-022F-F203
• Options enabled by key 1: MC01, JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
Jitter Option Installed
This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 736507-E6
• Installed Option Key 0: 0813-9073-9A2F-F09D
• Options enabled by key 0: WP01, WP02, WP03
• Installed Option Key 1: 51AB-FB0A-022F-F203
• Options enabled by key 1: MC01, JTA
• Opt WP01: Advanced Waveform Math Package Installed
• Opt WP02: Spectrum Analysis Package Installed
• Opt WP03: Parameter Analysis Package Installed
• Opt DDM: Disk Drive Measurements Installed
• Opt CKIO: Clock In/Out Installed
• Opt PRML: Supplementary Disk Drive Measurements Installed
• Opt DDFA: Disk Drive Failure Analysis Installed
• Opt MC01: Memory Card Reader and 512k SRAM Card Installed
• Opt JTA: Jitter and Timing Analysis Installed
• Opt CPUP: PowerPC High Speed Processor Installed
• Opt VGAC: VGA Output Port Installed
• Opt GPIB: IEEE-488 I/O Control Bus Installed
• Opt R232: Serial I/O Installed
• Opt CLBZ: Piezo Buzzer Alarm Installed
• Opt FD01: Floppy Drive Installed
• Opt GP01: Internal Graphics Printer Installed
• Opt CENT: Parallel Centronics Printer Port Installed
• Opt CKTR: Clock Trigger Installed
• Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max
This American Hoffmann R-11 Round-Spring Measuring Table is used and in excellent condition.
This American Hoffmann R-11 Round-Spring Measuring Table is used and in excellent condition. This unit includes two DIN-5c connectors.
These Agilent / HP E5022A Cables are used and in excellent condition.
• E5039-61603: E5039A SIGNAL IN to E5036A OUT 2 (SMA, 9.5 in.)
• E5039-61601: E5037A EXT DATA IN POS to E5039A DATA OUT POS (SMA, 9.5 in.)
• E5039-61602: E5037A EXT DATA IN NEG to E5039A DATA OUT NEG (SMA, 9.5 in.)
• E5041-61603: E5036A SIGNAL OUT to E5041A SIGNAL IN (SMA, 12 in.)
• E5039-61604: E5037A GATE IN to E5039A WR GATE OUT (BNC, 10 in.)
• E5041-61602: E5037A GATE OUT to E5041A TRIG IN (BNC, 14 in.)
• E5041-61601: E5035A WR GATE IN to E5041A WR GATE OUT (BNC, 14 in.)
• E5022-61606: E5036A SIGNAL OUT to E5038A SIGNAL IN (SMA, 24 in.)
• E5022-61614: E5037A CLOCK OUT to 4395A EXT REF INPUT (SMA to BNC, 10 ft.)
• C-25814-10 REV C4* 4/00 (Female DB-9 to Male DB-9 with 5 pins, 10 ft.)
• E5022-61640: CTRL to E5035A HEAD AMP CTRL (SCSI, 10 ft.)
• E5022-61613: E5035A TRIG OUT 2 to 4395A EXT TRIGGER (BNC, 10 ft.)
• E5022-61609: E5035A SECTOR IN to DMM SECTOR (BNC, 13 ft.)
• E5022-61608: E5035A INDEX IN to DMM INDEX (BNC, 13 ft.)
Cables:
• E5039-61603: E5039A SIGNAL IN to E5036A OUT 2 (SMA, 9.5 in.)
• E5039-61601: E5037A EXT DATA IN POS to E5039A DATA OUT POS (SMA, 9.5 in.)
• E5039-61602: E5037A EXT DATA IN NEG to E5039A DATA OUT NEG (SMA, 9.5 in.)
• E5041-61603: E5036A SIGNAL OUT to E5041A SIGNAL IN (SMA, 12 in.)
• E5039-61604: E5037A GATE IN to E5039A WR GATE OUT (BNC, 10 in.)
• E5041-61602: E5037A GATE OUT to E5041A TRIG IN (BNC, 14 in.)
• E5041-61601: E5035A WR GATE IN to E5041A WR GATE OUT (BNC, 14 in.)
• E5022-61606: E5036A SIGNAL OUT to E5038A SIGNAL IN (SMA, 24 in.)
• E5022-61614: E5037A CLOCK OUT to 4395A EXT REF INPUT (SMA to BNC, 10 ft.)
• C-25814-10 REV C4* 4/00 (Female DB-9 to Male DB-9 with 5 pins, 10 ft.)
• E5022-61640: CTRL to E5035A HEAD AMP CTRL (SCSI, 10 ft.)
• E5022-61613: E5035A TRIG OUT 2 to 4395A EXT TRIGGER (BNC, 10 ft.)
• E5022-61609: E5035A SECTOR IN to DMM SECTOR (BNC, 13 ft.)
• E5022-61608: E5035A INDEX IN to DMM INDEX (BNC, 13 ft.)
This HDI Instrumentation IPS-6000 / SRA-FA Hard Disk Surface Reflectance Analyzer and Controller is Parts Grade / As-Is condition and without warranty. The unit comes in two parts, the controller-processor unit, and the hard drive platter surface analyzer. All the necessary cables needed to operate this instrument are included, however it does not include computer or software.
An Artisan Technology Group technician tested this system and found error with the motor control card and RS232 port.
Processor Controller Unit:
Model: IPS-6000
Part Number: 1000-0051
Input Voltage: 240 V
Hard Disk Analyzer:
Model: SRA-FA
Spindel Size: 3.5"
HDI Instrumentation Model: UMC-8000
Part Number: 1000-0045
An Artisan Technology Group technician tested this system and found error with the motor control card and RS232 port.
Processor Controller Unit:
Model: IPS-6000
Part Number: 1000-0051
Input Voltage: 240 V
Hard Disk Analyzer:
Model: SRA-FA
Spindel Size: 3.5"
HDI Instrumentation Model: UMC-8000
Part Number: 1000-0045
This Agilent / HP E5022A Computer System is used and in excellent condition.
System Configuration:
• Processor: Intel Celeron, 566 MHz
• Operating System: Windows 95
• Memory: 128MB RAM
• Hard Drive: 7GB HDD
Installed Software:
• 3COMM NIC Utilities 4.0
• HP I-O Libraries H.01.02.00
• HP VEE Measurement Program5.0
• E5022/E5023 System Software
• SS Tool (E5010/E5011/E5013)
View Photo of Manuals and Software
View Photo of Additional Manuals
System Configuration:
• Processor: Intel Celeron, 566 MHz
• Operating System: Windows 95
• Memory: 128MB RAM
• Hard Drive: 7GB HDD
Installed Software:
• 3COMM NIC Utilities 4.0
• HP I-O Libraries H.01.02.00
• HP VEE Measurement Program5.0
• E5022/E5023 System Software
• SS Tool (E5010/E5011/E5013)
View Photo of Manuals and Software
View Photo of Additional Manuals
This Agilent E5010-61532 Z-Height Adjustment Tool is used and in excellent condition.
This Agilent / HP E5010 / E5011 / E5012 Spin Stand Shroud is used and in excellent condition.
This Danaher Motion / Dover Instrument Air Spindle is used and in excellent condition.
This Guzik RWA XMIT Host Adapter is used and in excellent condition.
Part Number: 301270, 301270Q
Part Number: 301270, 301270Q
This Agilent E5010-61533 Z-Height Adjustment Tool is used and in excellent condition.
Media T: 0.8mm
Media T: 0.8mm
This Agilent / HP E5010-61421 UTG Head Loading Mechanism is used and in excellent condition. This unit is designated as an HLM Control.
Unit is listed as E5029J OPT 002
This E5036A Filter Matrix VXI Module is used, and in excellent condition.
Manufacturing
