Items/Page
24 / 24 Results
Amada Miyachi / Unitek Miyachi 80F Thin-Line Manual Weld Head w/ Foot Switch
This unit was pulled from a working environment. A best effort was made to keep this complete. Please see photos for more detail. It ships as photoed.

Part Number:
2-142-04

80F Specs:
• Actuation: Manual
• Max Weld Force: 20 lb (89 N)
• Max Rating: 2 KVA (250 W-s)
• Electrode Diameter: 0.125 in (3.2 mm)
• Electrode Configuration: Opposed

Amada Miyachi / Unitek Miyachi Unibond II Power Supply
Part Number: UB27115, 1-191-02

Input Voltage: 115 VAC
Nor-Cal ESVP-1502-NWB Pneumatic Angle Valve
This Nor-Cal ESVP-1502-NWB Pneumatic Angle Valve is used and in excellent condition.

Configuration
• Type: NW-40B
• Port OD: 1.5 Inches

• Actuation: NC - Air to Open, Spring to Close
Leybold DN 16 ISO-KF Angle Valve
This Leybold DN 16 ISO-KF Angle Valve is used and in excellent condition.

Configuration:
• Stainless Steel Housing

• FPM Seals
• Supply Voltage: 100V ... 230V
• Frequency: 50 ... 60Hz
• Pickup-/Holding Power: 405/8.1 W
• Opening Time: 100 ms
• Closing Time: 240 ms
• Dead Time: 50 ms
• Conductance 4 l/s

Part Number: 28865

Inficon BPG400 DN 40 CF-R Bayard-Alpert Pirani Combination Gauge
This unit includes a DN 40 CF-R Flange.

Configuration:
• Seal with Center Ring and Filter

BPG400 Part Number: 353-502
Sensor Part Number: 354-491
Kurtz Ersa ERSASCOPE 1 BGA and SND Optical Inspection System
Includes:
• ERSASCOPE Stand
• Bifurcated Light Fiber
• Tokyo Electronic CS6460N CCD Camera (Type TK6788A6)
• X-Y Inspection Table

• S-Video (C/Y) Cable
• 5-Pin Remote Light Source Cable

12 VDC Adapter and Light Source are sold separately.

Part Number: VSSC 100 N

Ferraz Shawmut A30QS400-4IL Semiconductor Protection Fuse
Configuration:
• Fuse: Amp-Trap
• Rated Volts: 300
• Style: QS
• Amperes: 400

• Mounting Type: Blades, Bolt-In
• Integral Blown-Fuse Indicator: Trigger Actuator

Inficon BPG402-SP Bayard-Alpert Pirani ATM to Ultra-High Vacuum Gauge
This Inficon BPG402-SP Bayard-Alpert Pirani ATM to Ultra-High Vacuum Gauge is used and in excellent condition.

Configuration:

• Profibus
• DN 25 ISO-KF

Part Number: 353-574

Oerlikon Balzers PKG 020 Pirani-Cold Cathode Gauge Control
This unit has a cracked mbar meter cover; however, this does not affect its ability to function properly.

View Photo of cracked mbar meter cover.

Ferraz Shawmut A30QS800-4IL Semiconductor Protection Fuse
Configuration:
• Fuse: Amp-Trap
• Rated Volts: 300
• Style: QS
• Amperes: 800

• Mounting Type: Blades, Bolt-In
• Integral Blown-Fuse Indicator: Trigger Actuator

Amada Miyachi / Unitek Miyachi 86F Thin-Line Manual Weld Head
This unit was pulled from a working environment. A best effort was made to keep this complete. Please see photos for more detail. It ships as photoed.

Part Number:
2-146-03

86F Specs:
• Actuation: Manual
• Max Weld Force: 20 lb (89 N)
• Max Rating: 1 KVA (125 W-s)
• Electrode Diameter: Unibond Unitips
• Electrode Configuration: Parallel Gap

Peabody Engineering FV-03 Flame Signal Monitor Card w/ Housing
Input Power: 28 VA
Output Voltage: 330 VDC
Temperature Rating Head: -40 to 100 C
Temperature Rating Chassis: -40 to 70 C

Part Number: C026-00013A
Amada Miyachi / Unitek Miyachi Phasemaster 7 Programmable AC Welding Control
Configuration:
• Welding Functions: 10
• Weld Schedules: 128
• Valve Driver Outputs: (2) 24VAC and 115VAC

• Relay Outputs: 2

Input Voltage: 460V

Part Number: PM7/460, 1-240-04

Ferraz Shawmut A30QS350-4IL Semiconductor Protection Fuse
Configuration:
• Fuse: Amp-Trap
• Rated Volts: 300
• Style: QS
• Amperes: 350

• Mounting Type: Blades, Bolt-In
• Integral Blown-Fuse Indicator: Trigger Actuator

Amada Miyachi / Unitek Miyachi 88F Thin-Line Manual Weld Head w/ DFS/88 Firing Switch Junction Box
This unit was pulled from a working environment. A best effort was made to keep this complete. Please see photos for more detail. It ships as photoed.

Part Number: 2-161-06
DFS/88
Part Number: 4-31510-01

88F Specs:
• Actuation: Manual
• Max Weld Force: 20 lb (89 N)
• Max Rating: 5 KVA (250 W-s)
• Electrode Diameter: 0.245 in (6.2 mm)
• Electrode Configuration: Series

KLA Tencor / Ultrapointe Blower Assembly for the Ultrapointe 1010
This assembly includes (2) McLean Engineering 1NB412S77.

Input Voltage: 208/220 VAC
Amada Miyachi / Unitek Miyachi Unipulse Welding Transformer
This unit was pulled from a working environment. A best effort was made to keep this complete. Please see photos for more detail. It ships as photoed.
B and G 07-026-231 Module
This unit is a parts unit being sold as-is. We do not have the ability to test this unit. It will be sold as-is without warranty and will be priced accordingly. If you would like to purchase an individual component of this unit, please contact Artisan Technology Group Sales for pricing and availability.

Includes:
• (1) Bottle


24 / 24 Results
Contact Us
Fax:

(240) 376-1381