Configuration: • Total Length and Mounting Option: 9 Meters System Length, DIN Mount • Agency Approval Option: Multiple Approvals
The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
Configuration: • Coil Winding Insulation: H 180° • Temp Range: -20°C to 150°C • Duty Cycle: 100% ED. (Coil Temp 70°C at 20°C ambient) • Protection: IP65 with Connector • Voltage Range: Standard Industrial Voltage 6 to 415VAC or DC
This Lunite Hermetique / Tecumseh AWA9490ZXG 460VAC/3-Phase Compressor is new from surplus stock. It ships in the original manufacturer's box.
AWA9490ZXG:
• Refrigerant: R404A • Voltage: 460 VAC, 60 Hz, 3 Phase; 380-420 VAC, 50 Hz, 3 Phase • Part Number: AW616TT-125-A4 • Exterior Dimensions (W x D x H): 7 x 8 x 17 in
This Emerson Climate / Copeland KALB-015E-CAV-240 Copelametic Compressor is new from surplus stock.
KALB-015E-CAV-240
• Power: 1.5 HP • Volumetric Flow Rate: 315 ft3/hr • Input Voltage: 208-230V, 60Hz; 200-220V, 50Hz • Dimensions (L x W x H): 14.38 x 9.5 x 10.44 in • Weight: 93 lbs
This OMEGA LCAE-2KG Single-Point Load Cell is new from surplus stock. This unit ships in with standard documentation in manufacturer's box. OMEGA LCAE-2KG Datasheet (pdf)
Configuration: • Total Length and Mounting Option: 9 Meters System Length, DIN Mount
The GE / Bently 3300 XL 5/8 mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
This unit does not come with the top and side panels or swivel casters. This unit is designed to use HFE-7500 as the coolant and other coolants may not be compatible with the components in the unit's coolant loop.
Configuration: • Valve Series and Port Size: 041, 1/8 Inch • Valve Type: Single Solenoid Air Pilot w/Flush Non-locking Override • Function: 2-Position, 4-Way • Mounting: Valve Unit Only • Wiring Option: Plug-In DC w/Light • Port Type: NPTF or Valve Unit Only (DC) • Options: Standard • Voltage: 24 VDC
This American Stainless Pumps SSPC Centrifugal Pump is used and in excellent condition.
Part Number: C24324B2D3
Configuration:
• Pump Model: C=SSPC: Closed Impeller, 304SS Pump, 6 in. Case, Threaded Connections • Discharge x Suction: 2=1.5 in. x 2.0 in. NPT • Impeller Diameter: 43=4.375 in. • Impeller Vane Height (At a Reference Diameter of 4.38 in.): 24=0.240 in. • Mechanical Seal: B=Carbon/Ceramic/Buna • Motor HP: 2=2 HP • Motor Enclosure: D=Dripproof • Motor Power: 3=3500 RPM at 3/60/230-460V
This unit has some rust due to storage; however, this will not prevent it from functioning properly.
3SVBK3 Configuration: • 3: Nominal Flow - 55 GPM • SV: Product Line - Stainless Vertical • B: Material and Suction Discharge - 304 Stainless Steel, In-Line ANSI Flange • K: HP Rating - 7½ HP • 3: Driver - 575 V, ODP
Pump Configuration: • Pressure: 360 PSI Max • Temperature 250°F
Included Accessories: • Rigid Coupling; Part Number: 267635000 • Coupling Guard • Rigid Coupling Cap • (4) Coupling Screws • (4) MA and Seal Housing Screws
This OMEGA LCAE-2KG Single-Point Load Cell is new from surplus stock. This unit is an older model LCAE-2KG and is thinner and longer than the new model LCAE-2KG. This item ships in with standard documentation.
Part Number: 602-546 TM85 application: For measuring the coating thickness of paint on the inside and the outside of cylindrical aluminum food and beverage containers (tubes, cans).
This Emerson Climate / Copeland 3AB2-0310-CAB-207 Copelametic Compressor is new from surplus stock.
Configuration:
• Power: 3 HP • Thermally Protected • Volts: 230 • Hertz: 60 • Oil: MIN 70 oz • LRA: 86.0 • Phase: 1 • Dimensions (L x H x W): 18.0 x 12.69 x 13.0 in • Weight: 189.0 lbs
This unit is incomplete and it is recommended that the purchaser of this system contact TA Instruments for any needed parts or accessories, installation, setup and maintenance.
We do not have the expertise to fully test this unit and have documented all the information gathered from it in this page. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to make an appointment.
This unit includes a DSC Refrigerated Cooling System. This unit also has a DSC Autosampler Installed. The DSC Autosampler automatically loads sample and reference pans to the DSC, allows the programmed experiment to finish, then unloads the pans and begins the next experiment.
Configuration: • Cell Type: Standard DSC Cell • Dimensions: Depth 45.5 cm (18 in.) x Width 58.5 cm (23 in.) x Height 49.5 cm (19.5 in.) • Weight: 22 kg (48 lb) • Input: 120 VAC, 50/60 Hz • Ports: Gas purge, Cool-down line, Vacuum LNCA, (Liquid Nitrogen Cooling Accessory), EVENT relay, GPIB
This unit does not have the outer shell. View Photo of the front angle of the board. View Photo of the right side angle of the board. View Photo of the left side angle of the board.