Delta Design ETC 2000L High Performance Logic IC Thermal Characterization Unit
Stock # 73574-5
Before installing and operating this unit, the coolant lines will need to be completely flushed. In order for unit to operate correctly through the full temperature range, 3M Novec HFE7500 Engineered Fluid needs to be installed. This unit comes with a quick-connect air hose.
The environmental chamber has an application specific thermal unit installed. The thermal unit or tool is the part that makes contact with the Device Under Test, and applies the change in temperature. The tool may need to be changed according to the specific test being performed. View Photo of the tool installed in the environmental chamber.
Configuration:
• Input: 190-230 VAC
• Frequency: 50-60 Hz
• Phase: 3
• Interrupt Current: 65,000 AIC
• Largest Load Ampere Rating: 33 A
• Machine Main Breaker Ampere Rating: 50 A
• Full Load Amps: 40 A
• Temperature Range (Passive): -30°C to +150°C
• Temperature Ramp Rate: 100°C Per Second
• ESD: <100 V within 6" of device
• Communication Interface: GPIB and RS232
• Air: 80 psi, 2-3 scfm, clean, dry dewpoint 15°C below coldest chiller setpoint
• Weight: 340 kgs (750 lbs)
• Dimensions: 25.4W x 42D x 63H inches (0.65m x 1.08m x 1.62m)
• Chiller: Affinity PAG-040K-BE51CBD2 Installed*
• Optional Delta Design Power Summing Module Installed
• Passive Model Version
Computer:
• 700 MHz Intel PIII Processor
• 256 MB RAM
• 18 GB HDD
• ETC-2000 Software v2.2.1
*If desired, the Affinity PAG-040K-BE51CBD2 Chiller can be sold individually. Please contact us for pricing and availability.
View Photo of the interior with front door open.
View Photo of the interior with right hand side door open.
View Photo of the interior with left hand side door open.
View Photo of the interior with back door open.
View Photo of the back door.
The environmental chamber has an application specific thermal unit installed. The thermal unit or tool is the part that makes contact with the Device Under Test, and applies the change in temperature. The tool may need to be changed according to the specific test being performed. View Photo of the tool installed in the environmental chamber.
Configuration:
• Input: 190-230 VAC
• Frequency: 50-60 Hz
• Phase: 3
• Interrupt Current: 65,000 AIC
• Largest Load Ampere Rating: 33 A
• Machine Main Breaker Ampere Rating: 50 A
• Full Load Amps: 40 A
• Temperature Range (Passive): -30°C to +150°C
• Temperature Ramp Rate: 100°C Per Second
• ESD: <100 V within 6" of device
• Communication Interface: GPIB and RS232
• Air: 80 psi, 2-3 scfm, clean, dry dewpoint 15°C below coldest chiller setpoint
• Weight: 340 kgs (750 lbs)
• Dimensions: 25.4W x 42D x 63H inches (0.65m x 1.08m x 1.62m)
• Chiller: Affinity PAG-040K-BE51CBD2 Installed*
• Optional Delta Design Power Summing Module Installed
• Passive Model Version
Computer:
• 700 MHz Intel PIII Processor
• 256 MB RAM
• 18 GB HDD
• ETC-2000 Software v2.2.1
*If desired, the Affinity PAG-040K-BE51CBD2 Chiller can be sold individually. Please contact us for pricing and availability.
View Photo of the interior with front door open.
View Photo of the interior with right hand side door open.
View Photo of the interior with left hand side door open.
View Photo of the interior with back door open.
View Photo of the back door.
Show More Description
More Information
Delta Design ETC 2000 Series High Performance Logic IC Thermal Characterization Unit
Features
- -70°C to +150°C Setpoint Temperature Range Available
- Patented Power Balancing Junction Temperature Control
- 100°C Per Second Temperature Ramp Rate
- (...)
- Needs Only AC Power and Air - No Chilled Water Required
- Easy To Access Test Site
- Provides Temperature Control to a Wide Variety of Computer Components of Varying Sizes
- BGA, LGA, PGA, and MCM Device Kits Compatible
Description
The ETC 2000 Series represents Delta's active conduction thermal control products, featuring the industry's fastest and most accurate device thermal control technology for high-power logic devices.(...) With a -40°C to +150°C set point temperature range and patented Power Balancing™ junction temperature control, the ETC 2000 Series is capable of delivering true ±3°C performance. Unlike conventional thermal control systems, the ETC 2000 Series does not use LN2 or chilled water, and the unique thermal chamber permits fast device change-out regardless of set point. A GPIB interface enables test-system communication, while 8-channel on-system data acquisition permits precise tracking of thermal performance parameters.
The small-profile ETC 2000 heat exchanger provides pinpoint temperature accuracy directly at the surface of the package heat spreader or C4 die. This makes the ETC 2000 Series the industry's fastest set point temperature changing solution and gives it the capability to thermally control devices with power densities up to 100 Watts/cm2 and beyond without risk to the test result or thermal damage to priceless characterization devices.The ETC 2000 Series represents Delta's active conduction thermal control products, featuring the industry's fastest and most accurate device thermal control technology for high-power logic devices.
With a -40°C to +150°C set point temperature range and patented Power Balancing™ junction temperature control, the ETC 2000 Series is capable of delivering true ±3°C performance. Unlike conventional thermal control systems, the ETC 2000 Series does not use LN2 or chilled water, and the unique thermal chamber permits fast device change-out regardless of set point. A GPIB interface enables test-system communication, while 8-channel on-system data acquisition permits precise tracking of thermal performance parameters.
The small-profile ETC 2000 heat exchanger provides pinpoint temperature accuracy directly at the surface of the package heat spreader or C4 die. This makes the ETC 2000 Series the industry's fastest set point temperature changing solution and gives it the capability to thermally control devices with power densities up to 100 Watts/cm2 and beyond without risk to the test result or thermal damage to priceless characterization devices.The ETC 2000 Series represents Delta's active conduction thermal control products, featuring the industry's fastest and most accurate device thermal control technology for high-power logic devices.
With a -40°C to +150°C set point temperature range and patented Power Balancing™ junction temperature control, the ETC 2000 Series is capable of delivering true ±3°C performance. Unlike conventional thermal control systems, the ETC 2000 Series does not use LN2 or chilled water, and the unique thermal chamber permits fast device change-out regardless of set point. A GPIB interface enables test-system communication, while 8-channel on-system data acquisition permits precise tracking of thermal performance parameters.
The small-profile ETC 2000 heat exchanger provides pinpoint temperature accuracy directly at the surface of the package heat spreader or C4 die. This makes the ETC 2000 Series the industry's fastest set point temperature changing solution and gives it the capability to thermally control devices with power densities up to 100 Watts/cm2 and beyond without risk to the test result or thermal damage to priceless characterization devices.
Show More Description
Technical Specifications
Manuals, Datasheets, Drivers, Links
View It Live Request
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
InstraView Request Form
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 73574-5 - Delta Design ETC 2000L High Performance Logic IC Thermal Characterization Unit
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Delta Design. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Customers Also Viewed
