Items/Page
29 / 29 Results
Dynamic Engineering PCIeBPMCX1 PCIe-to-PMC Adapter / Carrier
Configuration:
• Optional Fan Installed

• Optional Right Angle Mount Power Cable Connector

Part Number: 10-2007-0702
Product Family: 5998-01-625-9840, 5998016259840

Dynamic Engineering PCI2PMC Adapter Module
This Dynamic Engineering PCI2PMC Adapter Module is used and in excellent condition.

Part Numbers: 10-2000-0607
Dynamic Engineering PCIeBPMCX1 PCIe-to-PMC Adapter / Carrier
Configuration:
• Optional Fan Installed

Part Number: 10-2007-0702
Product Family: 5998-01-625-9840, 5998016259840
Dynamic Engineering cPCI2PMC cPCI to PMC Adapter/Carrier Converter Card
This unit is the Standard cPCI2PMC cPCI to PMC Adapter/Carrier Converter Card.

Part Number: 10-2003-0209, 10-2003-0205
Dynamic Engineering PCIeBPMCX1 PCIe-to-PMC Adapter / Carrier
Configuration:
• Backplane I/O Interface Connectors Not Installed

Part Number: 10-2007-0702
Product Family: 5998-01-625-9840, 5998016259840

Dynamic Engineering PCI2PMC Adapter Module
This Dynamic Engineering PCI2PMC Adapter Module is used and in excellent condition. This unit has a female HD68 connector in the back of the board.

Part Numbers: 70004982-501, 10-2000-0603

Dynamic Engineering PCI-NECL-ASN1 Programmable NECL I/O with PCI DMA
This Dynamic Engineering PCI-NECL-ASN1 Programmable NECL I/O with PCI DMA is used and in excellent condition.

Configuration:

• PCI Interfaces: PCI Interface 33 MHz. 32 bit
• Access types: Configuration and Memory space utilized
• CLK rates supported: 33 MHz. PCI, PLL with 66 MHz reference to provide programmable frequencies
• I/O: 20 ECL Transmitters. 20 ECL receivers. 12 TTL with programmable direction
• Interface: D100 connector
• Software Interface: Control Registers within Xilinx

Part Number: PCI-NECL-ASN1

Dynamic Engineering PCI5IP 5-Slot PCI IndustryPack (IP) Carrier
This Dynamic Engineering PCI5IP 5-Slot PCI IndustryPack (IP) Carrier is used and in excellent condition.

Part Number: 10-2002-0304
Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier
This Dynamic Engineering PMC2PCI PMC to PCI Adapter / Carrier is used and in excellent condition.

Part Numbers: 10-2001-1203, 10-2001-1204
Dynamic Engineering PCIeBPMC PCIe-to-PMC Adapter / Carrier
This unit does not have a faceplate.

Part Number: 10-2008-0704
Dynamic Engineering PMC-Parallel-TTL-BA17 Digital Parallel PMC Module
This unit was originally ordered without the faceplate.

Part Number: 10-2007-0101
Dynamic Engineering PCI Altera 485 Module
This Dynamic Engineering PCI Altera 485 Module is used and in excellent condition.

Part Number: 10-2002-0707
Dynamic Engineering IP-BiSerial-NG4 Bi-Directional Serial Data Interface
This Dynamic Engineering IP-BiSerial-NG4 Bi-Directional Serial Data Interface is used and in excellent condition.
Dynamic Engineering IP-BiSerial-NG2 Bi-Directional Serial Data Interface
This Dynamic Engineering IP-BiSerial-NG2 Bi-Directional Serial Data Interface is used and in excellent condition.
Dynamic Engineering PMC Serial III-LM6 Multi Function Interface
This Dynamic Engineering PMC Serial III-LM6 Multi Function Interface is used and in excellent condition.

The PMC Serial III-LM6 is a custom interface providing four I/O channels each consisting of LVDS transmit and receive data and clock. The on-board PLL is used to generate the two clocks required for the design. The PLL is programmable, and uses a 40 MHz reference oscillator to generate a wide range of frequencies. The target rates for this design are 10 Mbits/sec for channels zero and one and 62.5 Mbits/sec for channels two and three.

Data for all channels is received MSB first using start and stop bits to separate data words. Channels zero and one send and receive 36-bit words (packets) consisting of two start bits (Œ1¹s) a 32-bit data field a parity bit and one stop bit (Œ0¹) with data changing on the falling edge of the clock (stable on the rising edge). The parity bit is calculated using even parity over the data field. A data frame is terminated with an idle packet consisting of a 36-bit word of all Œ0¹s. When no data is being sent, the data line remains in a Œ0¹ state.

Channels two and three use different formats for transmitted and received data. A transmit packet consists of one start bit (Œ1¹), a 32-bit data field, an odd parity bit and one stop bit (Œ0¹) for a total of 35 bits. The received data-word is 66 bits long consisting of one start bit (Œ1¹), a 64-bit data field and one stop bit (Œ0¹). Each data-frame begins with a sync word in the upper-half of the first data word. If this is not seen, data will still be stored, but a framing error will be latched. Parity is not used on this interface. Both interfaces have data changing on the rising edge of the clock (stable on the falling edge).

Dynamic Engineering ccPMC-Parallel-TTL-BA18-CC Digital Parallel PMC Module - Conformal Coated
This unit features conformal coating and was originally ordered without the faceplate.

Part Number: 10-2008-1301
Dynamic Engineering PCI1-B 64-Bit PCI Riser Card
This Dynamic Engineering PCI1-B 64-Bit PCI Riser Card is used and in excellent condition.
Dynamic Engineering CPCI-J2-SCSI J2 to SCSI Connector
This Dynamic Engineering CPCI-J2-SCSI J2 to SCSI Connector is used and in excellent condition.

Part Number: 10-2004-0501

Dynamic Engineering PCI Altera 485 Module
This Dynamic Engineering PCI Altera 485 Module is used and in excellent condition.

Part Number: 10-2002-0708
Dynamic Engineering cPCI2PMC-IO cPCI to PMC Adapter/Carrier Converter Card
This unit is the IO version of the cPCI2PMC cPCI to PMC Adapter/Carrier Converter Card.

Part Number: 10-2003-0210
Dynamic Engineering ExtendIO II PC Board
This unit has 4 sets on onboard connectors.

Part Number: 10-2002-0502
Dynamic Engineering CPCI-J2-I/O Cable
This Dymanic Engineering CPCI-J2-I/O Cable is used and in excellent condition.
Dynamic Engineering ExtendIO II PC Board
This unit has 4 sets on onboard connectors.

Part Number: 10-2002-0503
Dynamic Engineering ExtendIO II PC Board
This unit has 2 sets on onboard connectors.

Part Number: 10-2002-0503
29 / 29 Results
Contact Us
Fax:

(240) 376-1381