Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller
- 3-Channel Mico/Nano Positioning System
- NV40 / 3S Low-Noise Controller
- RS232 Interface
- Tritor 100 XYZ Nanopositioning Stage
- At Least 100um travel in all Axis
The resolution of piezoelectrical elements is almost always determined by the signal-to-noise ratio of the power supply. The better the signal-to-noise ratio, the higher the resolution of the piezoelectrical elements. This factor was the main consideration during the development of the NV 40/3S power supply. Minimum noise and high stability of the output voltage are the most important features of this power supply.
The NV 40/3S is a highly cost effective power supply due to its compact design, and construction without expensive modular electronics.
- separate display for each channel
- excellent signal-to-noise ratio for the highest resolution
- RS 232 serial port
- modulation input
- 10 turn potentiometer for fine adjustment
TRITOR 100; XYZ-Nanopositioning
Piezosystem Jena's unique TRITOR elements are extremely compact but offer motions of up to 100 μ m in all three axes. Parallel motion is achieved without play due to the mechanical design.
• highly compact design results in superior performance
• accurate parallel motion by parallelogram design
• high reliability due to solid state hinges
• motion without mechanical play
• high resolution in nm and sub-nm range
• motion up to 100 μm
• precision pin holes
Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller Manuals, Datasheets, Drivers, Links
Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller Specs
| Specifications | |
| +NV 40/3S Controller | |
| Number of Channels | 3 |
| Computer Interface | RS-232; Serial |
| Resolution | 12-bit |
| Main Voltage | 120VAC |
| Output Power (each channel) | 6W |
| Output Voltage | -10 to +150 V |
| Output Current (each channel) | 40mA |
| Bandwidth | 350 Hz |
| Modulation Input | 0-10V BNC |
| Input Resistance | 1kohm |
| DC Offset | 10-Turn Potentiometer; Full Range |
| Voltage Display | LED; 3-digit |
| Output Connector | LEMOSA |
| +Tritor 100 | |
| Motion in X,Y,Z | 100um |
| Capacitance (each axis) | 1.7 uF |
| Voltage | -10 to 150V |
| General | |
| Manufacturers | Piezosystem Jena |
| Model | Tritor 100 |
| Condition | Used and in Excellent Condition |
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 45238-1 - Piezosystem Jena Tritor 100 Micro/Nano XYZ Positioner Stage and NV 40/3S Controller
Expedited, Freight, and International shipping available.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our 90-Day Repair/Replace/Refund Warranty.
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
Fantastic company with great people! We are lucky to have them in Champaign!
Highly technical staff! Excellent customer service!
I found that the staff is very knowledgeable. I would recommend them to anyone looking for this type of equipment!
Staff knows their stuff! Very knowledgeable and helpful. Very satisfied!