Features:
- Compliance with CompactPCI Interface 2.0 R3.0
- Local PCI Bus Extender
- Suitable for all Intel Mobile PentiumIII Coppermine Processors in the 495-Pin BGA2 Package
- Up to 1 GB SDRAM Main Memory, 128 MB Soldered with ECC and 1 GB via SODIMM
- 256 KB FLASH for BIOS
- Onboard High Performance AGP VGA Controller
- One EIDE Interface, Two with Rear I/O Version
- One Fast Ethernet Device: 10BaseT and 100BaseTX
- Integrated Hardware Monitor
The CP302 is a highly integrated single-board computer that is designed around the Intel Mobile Pentium III family of microprocessors. The CP302 is available with either one or two CompactPCI interfaces (depending on version). The version with the 2nd CompactPCI bus is able to address a maximum of 14 slots.
Finding an optimum equilibrium between performance and power dissipation, the CP302 is a reliable Mobile PentiumIII controlled board supporting a clock speed of 700 MHz and higher when available.
The CP302 is equipped with a 69030 VGA chip with 4 MB SDRAM memory. Speed of operation is assured by means of the onboard 66 MHz AGP interface. High resolution is provided with the video controller supporting pixel resolutions of up to 1600 x 1200 or up
to 16.7 M colors. The board also features a 10BASE-T/100BASE-TX Fast Ethernet based on the Intel 82559 Fast Ethernet PCI Bus Controller.
Designed for stability and packaged in a rugged format, the board fits into all applications situated in industrial environments. The low power consumption of the board is further assured through the use of 3.3V and 1.5V I/O technology.
The board is compatible with the Microsoft Windows NT operating system. However, the performance of CompactPCI can be tailored to suit real-time applications and operating systems such as Linux, QNX or VxWorks which are instrumental to the success of CompactPCI in these market sectors.
The PEP CP302 3U Compact PCI PIII CPU Board may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
Functions
A single-board computer for 3U CompactPCI systems, providing embedded processing with an x86 Pentium III-class CPU. It interfaces with a 32-bit/33MHz PCI backplane and provides integrated I/O including 10/100 Ethernet, USB, serial (RS-232), and VGA video. Features an IDE/CompactFlash interface for mass storage and a PMC site for mezzanine card expansion. It is designed for system control and data processing in industrial automation, telecommunication, and transportation applications.
Platforms
3U CompactPCI single-board computer designed for embedded applications requiring high-performance computing in a compact form factor. Supports Intel Pentium III processor architecture. Interfaces with peripheral devices through CompactPCI bus connectors, enabling hot-swap capabilities in suitable backplanes. Compatible with CompactPCI chassis and systems. Features standard I/O interfaces including Ethernet, USB, serial ports, and display outputs. Operates in industrial temperature ranges and conforms to PICMG specifications for CompactPCI systems. Typically used in telecommunications equipment, industrial automation, transportation systems, and military/aerospace applications requiring reliable computing platforms.
Applications
High-performance embedded computing applications in telecommunications infrastructure, industrial automation systems, and military/aerospace platforms requiring ruggedized operation. Serves as central processing node in CompactPCI backplane systems for real-time data acquisition, signal processing, and control applications. Common deployments include base station controllers, radar processing systems, flight simulators, medical imaging equipment, and factory automation controllers. Suitable for applications demanding deterministic performance, extended temperature operation, and long-term availability in mission-critical environments where standard commercial computing platforms cannot meet reliability or environmental requirements.
Accessories
Requires 3U CompactPCI backplane with J1/J2 connectors for power and system bus interface. Needs CompactPCI chassis with cooling fans and power supply unit. External interfaces include dual 10/100 Ethernet RJ-45 connectors, four USB 2.0 Type-A ports, dual RS-232/422/485 serial DB-9 connectors, parallel port DB-25 connector, PS/2 keyboard/mouse mini-DIN-6 connectors, VGA DB-15 connector, and IDE 40-pin ribbon cable interface. CompactPCI P1 connector provides 32-bit PCI bus with 124-pin Euro-DIN connector format.
Interfaces
One 3U CompactPCI connector (110-pin J1) for PCI bus interface and power; one PIII CPU socket; Front panel interfaces include one RJ45 10/100Base-T Ethernet port, one DB9 serial RS-232 port, and one VGA 15-pin D-sub connector for video output. Internal interfaces include IDE connector (40-pin) for storage devices and floppy disk connector (34-pin). Additional connectors include USB 1.1 ports (type A), PS/2 keyboard and mouse mini-DIN connectors.
Specifications
3U CompactPCI CPU board, supports Intel Pentium III processors, up to 1GB SDRAM, integrated graphics controller, Ethernet, serial, parallel, USB interfaces, CompactFlash socket, PICMG 2.0 compliant, used in industrial control, communication, and embedded systems.
This section includes content generated with the assistance of artificial intelligence (AI) tools. AI is used to increase efficiency and provide timely information. Please note that the content may not have been reviewed for accuracy or completeness. Use this information at your own discretion, and verify details independently as needed.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for PEP. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.