Items/Page
33 / 33 Results
This KLA Tencor P-2 Long Scan Profiler is used and in excellent condition.

Configuration:

• 12.5 µm Stylus

Software:

• Tencor P-2 Long Scan Profiller Version 1.6.2
• Sequence / Data Base
• Stress Analysis
• Interactive 3-D

Input Voltage: 120VAC Only

Includes:

• Kinetic Systems Vibraplane Table, Model 1201-02-11
• KLA Tencor Stylus Alignment Tool, Part Number 219517

View Photo of a screenshot from this unit
View Photo of a screenshot from this unit

This board is also known as the Advanced Motion Controls PC3XD-EQ3.
This KLA Tencor SFS-7600 Surfscan Patterned Wafer Inspection System is used and in good condition. We do not have the expertise to fully test this unit and have documented all the information gathered from it in this page. It is recommended that the purchaser of this system contact KLA-Tencor for installation, setup and maintenance. A very good effort was made to retain accessories. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to set this up.

The aligner operated on boot up and the internal fixture accepted a 200mm wafer. The aligner takes 100, 125, 150, and 200mm wafers however the internal fixture will only take 200mm wafers; wafer racks are sold separately. The system needs both a vacuum and air source to operate. The right side keyboard door hinge is broken and the keyboard is missing two keys however this does not affect its functionality. Service screen indicates that the laser will need to be replaced. You can view image of the keyboard and service screen shot using the links below.

PC Configuration:

• Processor: 66MHz
• RAM: 23 MB
• HDD: 850 MB

Software:

• SFS: 7x00 Series Software Ver. 3.5.0

View Photo of Keyboard
Surfscan 7600 Screen Shots (pdf)

This board is also known as the Brooks / PRI Automation / Equipe Technologies 2002-0142-022.
This unit is also known as the Brooks / PRI Automation ESC-218BT-S293. The internal cards have been removed from this unit; if you need one of these components, contact Artisan Technology Group Sales for pricing and availability.
This system appears to be complete. System includes: CRS-3100 Optical Review System, Sony Trinitron Color Video Monitor, Toshiba Image Master Digital Video Printer, Sony Trinitron Multiscan Monitor, Blower, Hoses for Blower, Keyboard and Mouse, Emergency Stop Switch, RGB Video Cables, Toshiba Remote Printer Control, VGA Cable (Box), XYZ Controller. For specific photos of what is included, see bottom of this stock-item.

We do not have the expertise to fully test this unit and have documented all the information gathered from it in this page. It is recommended that the purchaser of this system contact KLA-Tencor for installation, setup and maintenance. A very good effort was made to retain accessories. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to set this up.

This unit will ship in several crates. See picture section for photo of crates.

PC Configuration:
• Processor: Pentium III 850Mhz
• OS: Windows NT 4.0 SP6
• Memory: 265 MB RAM
• Hard Drive: 17 GB HDD
• Keyboard, Mouse and Monitor Included

Software Installed:
• Hummingbird Connectivity V7.0
• Equinox Quickview V530
• Equinox V4.16
• Iomega
• Iomega backup
• EQT32 V3.15
• Adobe Acrobat 4.0
• KLA Tencor 2.1.3
• KLA Tencor CRS V6.0.0.13 June 13 2004

Input Voltage: 208VAC, Single Phase

View Photo of CRS 3100
View Photo of CRS 3100
View Photo of CRS 3100
View Photo of the system connected to computer
View Photo of hour meter for the laser
View Photo of computer, emergency stop and xyz controller
View Photo of video monitor and printer
View Photo of blower motor and hoses
View Photo of locator plates


This system appears to be complete, with the exception of the Signal Light Tower. The system light tower was likely uninstalled when the instrument was decommissioned to fit through a doorway and became orphaned. System includes: CRS-3100 Optical Review System, Sony Trinitron Color Video Monitor, Toshiba Image Master Digital Video Printer, Sony Trinitron Multiscan Monitor, Blower, Hoses for Blower, Keyboard and Mouse, Emergency Stop Switch, RGB Video Cables, Toshiba Remote Printer Control, VGA Cable (Box), XYZ Controller. For specific photos of what is included, see bottom of this stock-item.

We do not have the expertise to fully test this unit and have documented all the information gathered from it in this page. It is recommended that the purchaser of this system contact KLA-Tencor for installation, setup and maintenance. A very good effort was made to retain accessories. This item will be sold as/is without warranty and will be priced accordingly. However, if desired, this unit can be inspected on-site. Please contact Artisan Technology Group Sales to set this up.

This unit will ship in several crates. See picture section for photo of crates.

Signal Light Tower is Not Included

PC Configuration:
• Processor: Pentium III 850Mhz
• OS: Windows NT 4.0 SP6
• Memory: 265 MB RAM
• Hard Drive: 17 GB HDD
• Keyboard, Mouse and Monitor Included

Software Installed:
• Hummingbird Connectivity V7.0
• Equinox Quickview V530
• Equinox V4.16
• Iomega
• Iomega backup
• EQT32 V3.15
• Adobe Acrobat 4.0
• KLA Tencor 2.1.3
• KLA Tencor CRS V6.0.0.13 June 13 2004

Input Voltage: 208VAC, Single Phase

View Photo of CRS 3100
View Photo of CRS 3100
View Photo of CRS 3100
View Photo of hour meter for the laser
View Photo of computer, emergency stop and xyz controller
View Photo of video monitor and printer
View Photo of blower motor and hoses


This board is also known as the Advanced Motion Controls PC3XD-PF1.
Configuration:
• (2) BPS Redundant Power System Models: BPS-270RD
• (1) Cooling Fan

Part Number: 0031469-000
Configuration:
• 40MHz MPU M680X0
• 1 MB Video DRAM
• 8 MB DRAM

• 10-Pin Male Camera Drive Connector
• 20-Pin Male Illum / Video Control Connector

Part Number: 6001756-05

Configuration:
• 32-Bit Graphics Processor TMS34010-40
• 1 MB Video DRAM
• 4 MB DRAM

• (1) DB9 Serial Port
• (1) DB15 Video Port

Part Numbers: 6001755-03, 3281-000051-11

Dimensions:
• 1 5/8" x 2 1/16" x 2 3/16" (4.13cm x 5.24cm x 5.55cm)

Part Number: 0037258-000 AB

Dimensions:
• Diameter: 1 9/16" (3.96cm)
Components:
• (1) RSF Elektronik 320mm Interval Actuator
• (1) RSF Elektronik 370mm Interval Actuator

• (2) Vexta C6591-9212 2-Phase Stepping Motors


This unit includes the stand.

Lens Housing Dimensions:

• 1 1/8" x 1 1/8" x 1 1/2" (2.86cm x 2.86cm x 3.81cm)

View Photo of the stand.


Mount Dimensions:
• 3 1/2" x 3 1/2" x 13/16" (8.89cm x 8.89cm x 2.06cm)

View Photo of base.


Configuration:
• Outlet Strip, 120 VAC
• J103 Laser Power Supply, 200-240 VAC

• J109 Stage Controller, 200 - 240 VAC
• P108 Connector
• Option J111 SGI UPS Power, 120 VAC
• J106 AUX1, 115 VAC
• P111 Workstation Input Power, 120 VAC
• J104 External Exhaust, 200-240 VAC
• J102 AUX Interlock Connector

Input Voltage: 240 VAC

Mount Dimensions:
• 3 1/2" x 3 1/2" x 13/16" (8.89cm x 8.89cm x 2.06cm)

View Photo of base.


This unit is missing adjustment thumb screws.

Dimensions:

• 2" x 2" x 1 1/8" (5.08cm x 5.08cm x 2.86cm)

View Photo of missing adjustment thumb screws.


This unit is missing adjustment thumb screws.

Dimensions:

• 2" x 2" x 1 1/8" (5.08cm x 5.08cm x 2.86cm)

View Photo of missing adjustment thumb screws.


33 / 33 Results
Contact Us
Fax:

(240) 376-1381